Pallet Racks in Algodones, NM

Pallet racks in Algodones, NM should start with the weight, shape, and handling method of the material being stored. Santa Fe Pallet Rack supplies new warehouse racking and cantilever rack for palletized inventory, steel, and other long loads.

At I25 Exit 248, NM315/NM313 and East Frontage warehouses with storage yards make truck-to-rack clearance worth checking. Use measured receiving space, pallet dimensions, and forklift movements to develop the layout rather than assuming every available wall should carry storage.

Selective storage gives the operator direct access to each pallet position. That matters when incoming pieces have different weights or when a full pallet must leave without moving another load. Group materials by handling requirements, then establish beam elevations around the actual pallet heights. Avoid assigning every product the same opening simply because uniform rows look orderly.

For heavy palletized material, record the heaviest loaded pallet rather than an average shipment. Beam capacity applies to a pair of beams at one level. Frame capacity changes with frame height and beam spacing, so a beam rating alone cannot establish the capacity of an entire bay.

Separate these handling requirements before choosing a bay width or counting storage positions.

For the Algodones layout, a 42-inch upright is a common starting point for a 48-inch-deep pallet. A 96-inch beam commonly accommodates two 40-inch-wide pallets, subject to the required clearances and load arrangement. Neither dimension should be treated as a substitute for measuring unusually shaped pallets or material that extends beyond their edges.

Compare rack height with both usable clear height and the forklift’s lifting capability. Place heavy or frequently retrieved inventory where the truck can handle it appropriately. Reserve the turning and approach space needed to place the load without treating the rack opening as a guide for a poorly aligned pallet.

Send a building sketch showing doors, usable storage boundaries, and receiving space. Add pallet dimensions, the heaviest load per level, clear height, and building size. We use those details to prepare a free CAD layout and an itemized quote so the specified storage positions can be reviewed before ordering.

Santa Fe Pallet Rack supplies new material and schedules and manages experienced installation crews. Installation planning follows the bay count, configuration, and readiness of the working area. Racks are anchored to the floor. Standard pallet rack components have a 48-hour quick ship program; component eligibility and other material timing are confirmed with the quote.

Long stock needs support along its length and room for the truck to approach squarely. Provide the shortest and longest pieces, bundle weights, and the points where material can safely rest. Arm length should accommodate the load depth without leaving unsupported material where it can interfere with travel or handling.

Single-sided arrangements can suit a perimeter location, while double-sided arrangements allow loading from opposing aisles. The decision follows available handling space, not just the number of arms that fit on a drawing. Keep access to short pieces in mind when longer bundles share the same storage area.

Send Your Pallet Sizes. Start With a Layout.

Plan your Algodones rack job: clear height, loaded pallet dimensions and forklift reach set the layout.