Pallet Racks in Los Alamos, NM

Pallet racks in Los Alamos, NM require a clear distinction between the load being stored and the space available to handle it. Industrial warehouse racking should follow measured pallets, verified weights, and actual access needs.

LANL receiving, DP Road, and Research Park put selective storage in context where tight footprints matter. Start with the loads that require individual access, then assess how beam elevations, decking choices, and truck aisles work together instead of treating each as a separate purchasing decision.

Selective teardrop storage gives mixed SKUs their own accessible positions. That matters when different loads must be retrieved independently rather than held behind other pallets in a deep lane. The first inventory review should identify pallet footprints, load heights, and the number of positions needed for each group.

A smaller footprint does not remove the need for handling space. Rack height is limited by building clearance and forklift lifting capability, while aisle width follows the truck. A drawing that shows all three relationships is more informative than a position target detached from the equipment that must serve it.

Santa Fe Pallet Rack supplies new equipment and develops the storage plan from those details.

There is no single capacity figure for every rack bay. Beam capacity refers to a pair of beams at one level; frame capacity depends on the upright height and the spacing of the beams. Moving levels can therefore change the frame assessment even when the same components remain in place.

Use the heaviest pallet as the design basis rather than averaging light and heavy loads. Include load plaques when reviewing the completed specification. A capacity discussion should connect the actual load to its assigned level, not rely on an isolated number from a different configuration.

Submit pallet dimensions, the heaviest load per level, clear height, and building size for a free CAD layout. The exact position count depends on the usable height, aisle arrangement, and truck. Early planning often uses 12–13-foot counterbalance aisles, 8–10-foot reach aisles, or 5–6-foot very narrow aisles, subject to the actual equipment.

An itemized quote then ties the layout to the order. Positions, height, beam capacity, decking, freight, and installation influence cost. Santa Fe Pallet Rack can coordinate design and new material supply, with experienced installation crews scheduled and managed for the agreed work. Installation planning depends on readiness and bay quantity.

Decking is part of the configuration discussion, not a detail to leave until after the rack is selected. Describe the loads that will occupy each level and review the decking alongside beam length and capacity. Include it in the itemized quote so the material list reflects the actual storage arrangement.

For common pallet dimensions, a 42-inch upright is a starting point for a 48-inch-deep pallet. Two 40-inch pallets can be accommodated with 96-inch beams, and three with 144-inch beams. The 108-inch beam length is another option. Final dimensions need to be checked against the intended loads and access.

Send Your Pallet Sizes. Start With a Layout.

Plan your Los Alamos rack job: clear height, loaded pallet dimensions and forklift reach set the layout.